Humidity Chambers HCP

  • Perfect environmental simulation in the humidity chamber This climate chamber offers the full range of comfort, reliability, and safety. It has active humidity control set from 20 % to 95 % rh and an unsurpassed homogeneity of temperature and humidity over the entire interior. It is suited for environmental testing, environmental simulation, accelerated service life tests, and 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78.

Also Suitable for:

  • Pharmaceutical
  • Food and Beverage Industry
  • Chemicals
  • Material Processing

Features:

  • Temperature range up to +90 °C
  • 4 model sizes (56 , 107 , 156, 241 litres volume)
  • 1 model variant: TwinDISPLAY
  • Active humidity control 20 to 95 % rh
  • Double doors as standard:
  • 1. Prevention of contamination
  • 2. Prevention of drops or rises in temperature
  • 3. An optimal view of the sensitive chamber load through wide-area heated inner glass door
  • Visual and acoustic alarm
  • AtmoCONTROL software on USB Stick for programming

Options:

  • Battery-buffered ControlCOCKPIT.
  • Entry port, 23 mm clear diameter, for
  • Door with lock and key (safety lock)
  • Potential-free contact for combination error message (e.g. supply failure, sensor fault, fuse) Potential-free contact for combination error message (e.g. supply failure, sensor fault, fuse)
  • MobileALERT, notification by SMS in case of any error or alarm of the device (Requires option H6)
  • Perforated stainless steel shelf
  • Stainless steel grid, electropolished
  • Central water supply with filter cartridges for connection to the domestic water supply. Product information on demand.
  • Central water supply without filter cartridges for connection to the domestic water supply (only for demineralized water with a conductivity of 5 to 10 μS/cm and a pH value between 5 and 7). Product information on demand ZWVR7
  • USB-Ethernet adapter
  • Ethernet connection cable 5 m for computer interface
  • USB User-ID stick (with User-ID license):
  • Stacking set (4 pcs) for stacking of appliances of same size Stacking set (4 pcs) for stacking of appliances of same size
  • Stacking set (consisting of stacking corners, one connecting plate for the rear, two wall brackets) for stacking of two units of same size
  • Stacking set (consisting of stacking corners, one connecting plate for the rear, two wall brackets) for stacking of two units of same size (size 240 only in combination with sub frame B33509 or B43598)
  • Sub frame (622 mm high) adjustable in height (sizes 150/240: should not be used for 2 stacked units)
  • Sub frame (130 mm high); sizes 150/240: only in combination with the corresponding stacking sets for stacked appliances.
  • Sub frame, on castors (height 120 mm; stainless steel, material 1.4301)
  • Software conforming to FDA AtmoCONTROL.
  • Integration of one additional unit (up to max. 31 units) into an already existent FDA-software license (only for units with TwinDISPLAY)