Climate Chambers ICH/ICHL

  • Climate chamber ICHeco for stability testing in accordance with ICH and GMP Climate-friendly and powerful: the ICHeco climate chamber for the stability testing of pharmaceuticals, cosmetics or food works with environmentally-friendly CO2 (R744) as refrigerant. Memmert is thus initiating the climate-friendly future of compressor-cooled temperature control appliances. Furthermore, the ICHeco scores with its unique uniformity of temperature and humidity. Via an air jacket around the hermetically sealed work area, heat is quickly and extensively introduced into the climate chamber over four sides. Icing over of the cooling appliance and sample drying are successfully avoided.

Also Suitable for:

  • Pharmaceutical
  • Chemicals

Features:

  • Interior and Exterior Both made of Stainless steel
  • 3 Different model sizes :108 , 256 & 749 Litres
  • Temperature range : -10 ºC up to + 60 ºC (without Humidity)
  • Temperature range : +10 ºC up to + 60 ºC (with Humidity)
  • Digitally controlled active humidification and dehumidification 10 to 80 % rh
  • 1 model variant -TwinDISPLAY
  • Double Door (Inside glass, outside stainless steel
  • Air Jacket thermostating system
  • Capacitive type humidity sensor
  • Models ICH L with Illumination unit
  • Models ICH C with CO2 Control
  • Validatable Software according to FDA 21 CFR Part 11 available as option
  • ICHeco: With natural and climate -friendly refrigerant CO2 (R744)

Options:

  • Chamber modification for the application of reinforced perforated stainless steel shelves or stainless steel grids (bearing rails mounted in the working chamber) - includes replacement of standard grids by reinforced grids (ICHeco/ICH only)
  • Illumination unit
  • Alternative light boxes (replace the standard lighting
  • Entry port, 23 mm , Entry port (silicone), 40 mm clear diameter
  • 4 to 20 mA current loop interface,
  • Fan speed monitoring with switching off the heating and with alarm in case of failure
  • Compressed air dehumidification (efficient dehumidification of the interior by means of compressed air – for models ICH and ICHL). Standard works calibration certificate (measuring point chamber centre) at +10 °C with 10 % rh.
  • Door with lock and key (safety lock)
  • Potential-free contact for combination error message (e.g. supply failure, sensor fault, fuse)
  • Door-open-recognition, shuts down humidity, light and CO2 (standard with ICHLeco/ICHL)
  • Mobile ALERT, notification by SMS in case of any error or alarm of the device (Requires option H6)
  • Stainless steel grids, electropolished Stainless steel grids, electropolished
  • Reinforced stainless steel grid, electropolished, max. loading 60 kg (model 750 with guide bars and fixing screws and only in connection with option K1) Please consider max. loading of chamber
  • Perforated stainless steel shelves
  • Holder for water tank (2.5 litres) for mounting on the rear of the appliance. Standard equipment for size 750
  • Central water supply with filter cartridges for connection to the domestic water supply. Product information on demand.
  • Central water supply without filter cartridges for connection to the domestic water supply (only for demineralized water with a conductivity of 5 to 10 μS/cm and a pH value between 5 and 7). Product information on demand ZWVR7
  • USB-Ethernet adapter
  • USB User-ID stick (with User-ID licence): B33170
  • Software conforming to FDA AtmoCONTROL.
  • Integration of one additional unit (up to max. 31 units) into an already existent FDA-software licence (only for units with TwinDISPLAY)
  • External measuring instrument with sensors for daylight and UV-light. Product information on demand (models HPPeco, ICHLeco/ ICHL, IPPecoplus)
  • External measuring instrument with sensors with additional measuring head for temperature and humidity measurement. Product information on demand (models HPPeco, ICHeco/ICH, ICHLeco/ICHL, IPPecoplus and ICOmed)