CO 2 Incubator ICO

  • The control system of the Memmert CO2 incubator ICO is so finely tuned that the appliance reaches the setpoint temperature very quickly and without temperature overshoots. Alarm notifications to your mobile phone guarantee the safety of the chamber load, and the battery buffered ControlCOCKPIT ensures continuous CO2 control even when there is a power failure. Ideal hygiene is a given too: rounded edges enable easy and thorough cleaning; the interior can be sterilized within 60 minutes at 180 °C.

Also Suitable for:

  • Pharmaceutical
  • Cosmetics

Features:

  • Interior and Exterior both made of Stainless Steel
  • 1 Model Variant: TwinDISPLAY
  • 4 model sizes (56,107,156,241, liters volume)
  • Precise control of temperature, Humidity, CO2 & Optional O2 Content
  • Temperature ranges up to +50ºC
  • Humidity range 40 to 97 % rh (active and passive control available)
  • 6 side heating incl. heated inner glass door short recovery times , avoiding condensation
  • Additional optional modules for feature expansion
  • Standard sterilization programmed 6o minutes at 180ºC without removing any sensor
  • Calibration facility for temperature CO2, and humidity on the controller
  • Various accessories available as option on request

Options:

  • Battery-buffered ControlCOCKPIT.
  • Two gas connections with quick release connectors,
  • Electropolished interior
  • Active microprocessor control for humidifying and dehumidifying (40 - 97 % rh),
  • Control of oxygen concentration by N2 inlet;
  • Peltier cooling unit enables a working temperature of +37 °C even at higher ambient temperatures of up to +35 °
  • Capacitive humidity sensor for measuring and displaying the relative humidity
  • Entry port (silicone), 40 mm clear diameter,
  • 4 - 20 mA current loop interface, temperature controller, , humidity controller ,CO2 controller,O2
  • Heated inner door with partitioned glass doors
  • Door with lock and key (safety lock)
  • Door hinged on the left
  • Potential-free contact for combination error message
  • MobileALERT, notification
  • Perforated stainless steel shelf
  • Water dish
  • Central water supply with filter
  • Central water supply, without filter
  • HEPA14-filter for chamber according to EN 1822, packed in sterile condition, incl. fixing unit
  • USB-Ethernet adapter
  • USB User-ID stick (with User-ID license
  • Stacking set (4 pcs) for stacking of appliances of same size
  • Stacking set (consisting of stacking corners, one connecting plate for the rear, two wall brackets) for
  • Sub frame 622 mm high , 130 mm high, height 120 mm
  • CO2 pressure reducing valve DIN 8546,
  • N2 pressure reducing valve to DIN EN ISO 2503
  • Software conforming to FDA AtmoCONTROL.